Garnet
Waterjet

Years of research and development have led Meyer Tool into the new and rapidly expanding area of Waterjet. This has led to advancements in waterjet hole drilling, hole shaping, surface preparation, coating removal, and many more specialized capabilities. Meyer Tool’s Waterjet Department can assist you with any turbine related Waterjet need.

The Aerospace and Gas Turbine Industries have long needed a process that can machine hot section components that have a non-conductive coating. Waterjet is a great solution for precision drilling, cutting, and coating removal on these component types.

Meyer Tool’s Waterjet Department has 6-Axis movement on all waterjet machines. Combine these machines with the powerful inspection capabilities already in use at Meyer Tool, and any application is possible.

Precision Waterjet Processes:

Cutting

  • We have cut as thick as 22" thick Carbon Steel and thin as 0.005" thick Hastalloy X
  • We can cut simple flat plate, but also the complex, awkward 3-D shapes of the aerospace industry
  • We can cut a variety of materials and parts: Composites, High-Temp Alloys, Ceramics, Coated parts, Lab samples, etc.
  1. Full 6-Axis CNC Movement
  2. Small to Large work envelopes (up to 10' L x 6' W x 3' H)
  3. Renishaw Probing abilities for dynamic programming on complex geometries
  4. Tolerances as small as ±0.001"

Stripping/Milling

  • We have stripped diffusion coatings (including the diffusion layer) from Gas Turbine components
  • We are able to Surface Mill to a specified depth, even on complicated geometries
  • Cracks on worn components can be virtually erased with the waterjet process
  1. Full 6-Axis CNC Movement
  2. Small to Large work envelopes (up to 10' L x 6' W x 3' H)
  3. Non-Destructive In-Process Inspection Methods
    1. X-Ray Fluorescent
    2. Ball Micrometer
    3. Ultrasound
    4. Edy Current
    5. Heat Tint
    6. X-Ray
    7. Fluorescent Penetrant Inspection (FPI)
  4. Tolerances as small as ±0.001"

Surface Prep

  • We have a rotary nozzle water-only process that is able to clean or prepare surfaces

Hole Drilling

  1. Hole diameters as small as 0.013" to as large as 0.060" or more
  2. Depths can reach several inches, dependant on hole size, taper allowance, and material
  3. Ceramic coatings with varying thicknesses can easily be drilled through
  4. Possible angles range from 30° - 90° from surface
  5. Full 6-Axis CNC Movement
  6. Small to Large work envelopes (up to 10' L x 6' W x 3' H)
  7. Accurate tolerances as small as ±0.001" on diameter
  8. True Position as low as 0.010" on existing parts
  9. Vision machine correlation
  10. Taper as small as 0.001" or less for thinner materials
  11. Hole drilling into cavities is possible
  12. Shaped holes based on customer specifications

Hole Clearing

  1. Vision machine correlation
  2. Ceramic coatings with varying thicknesses can easily be cleared
  3. Full 6-Axis CNC Movement
  4. Small to Large work envelopes (up to 10' L x 6' W x 3' H)
  5. Shaped holes can also be cleared